Watch the videos underneath or read the instructions to learn how to apply.
How to apply:
1) clean the surface. 2) with small pieces of scoth tape, place the decal in the position you wish. Take a few steps back to make sure you have it the correct position. 3) with the decal still taped to the wall, start pulling out the white liner (one corner at a time) and use the included spatula to smooth the transparency mask to the surface until the white liner is completely out. 4) pull off the transparency mask (slowly!) making sure that the decal is glued to the wall using the spatula to help you 5) repeat the steps 3 and 4 to apply the other parts of your composition (if your sticker has more than 1 part) and your sticker is ready.
About the decal:
Your decal can be applied on any smooth, flat and bump free surface, like walls, glasses, mirrors, tiles or even furniture.
• the decal comes in three layers to make sure you’ll have an easy install:
1) transparency mask (clear sticker),
2) sticker (laser cut draw),
3) liner (white paper that protects the glue).
• the decal is made of self glued, laser cut, cylindrical PVC.
• decals applied indoors should last a REALLY long time, outdoor application is rated at 3 years, except for the gold and silver colors, which will last about 18 months outdoors.
• after applied, the decal cannot be re-applied in another location.
Cautions:
• make sure that the surface where the decal is going to be applied is dried and cleaned.
• after the application, it is recommended you clean your wall decal only with a duster and an occasional damp cloth. Don’t ever use rubbing alcohol, as it will damage your decal.
• to remove the decal use a sharp instrument , such as a scissor to help pull off the edges and then pull it all off carefully.
